LITLHAKISO TSA LITŠOANTŠISO
| Lebitso la Sehlahiswa | Koba e chesang ea induction |
| Boholo | 1/2"-36" e se nang moeli, 26"-110" e cheselitsoeng |
| Standard | ANSI B16.49, ASME B16.9 le customized joalo-joalo |
| Botenya ba lebota | STD, XS, SCH20,SCH30,SCH40, SCH60, SCH80,SCH100 ,SCH120,SCH140,SCH160, XXS, e hlophisitsoeng, joalo-joalo. |
| Setsoe | 30° 45° 60° 90° 180°, joalo-joalo |
| Radius | multiplex radius, 3D le 5D e tumme haholo, hape e ka ba 4D, 6D, 7D,10D, 20D, customized, joalo-joalo. |
| QETA | Bevel end/BE/buttweld, e nang le kapa e nang le tangent(peipi e otlolohileng ntlheng e ngoe le e ngoe) |
| Bokaholimo | e bentšitsoeng, e tiileng ea tharollo ea mocheso oa mocheso, anneal, pickled, joalo-joalo. |
| Lintho tse bonahalang | Ts'epe e sa beng le mabali:A403 WP304/304L, A403 WP316/316L, A403 WP321, A403 WP310S,A403 WP347H, A403 WP316Ti,A403 WP317, 904L,1.4301,1.4307,1.4401,1.4571,1.4541,254Mo le joalo-joalo |
| Duplex steel:UNS31803, SAF2205, UNS32205, UNS31500, UNS32750 , UNS32760,1.4462,1.4410,1.4501 le joalo-joalo. | |
| Nickel alloy tšepe:inconel600, inconel625, inconel690, incoloy800, incoloy 825,incoloy 800H, C22, C-276,Monel400,Alloy20 joalo-joalo. | |
| Kopo | Indasteri ea peterole; indasteri ea lifofane le sefofane; indasteri ea meriana,phepelo ea khase; setsi sa motlakase;kaho ea likepe; phekolo ea metsi, joalo-joalo. |
| Melemo | setoko se itokisitseng, nako ea ho fana ka potlako; e fumaneha ka boholo bohle, e hlophisitsoe; boleng bo holimo |
MOLEMO OA HO TLOA TŠOANELANG HO KOBA
Thepa e Ntle ea Mechini:
Mokhoa o chesang oa ho kobeha o tiisa hore thepa ea mochine ea phala e kholo e bapisoa le litharollo tse batang le tse nang le welded.
E fokotsa Litšenyehelo tsa Weld le NDT:
Bend e chesang ke mokhoa o motle oa ho fokotsa palo ea li-welds le litšenyehelo tse sa senyeheng le likotsi tsa thepa.
Tlhahiso e Potlakileng:
Ho kobeha ha induction ke mokhoa o sebetsang haholo oa ho kobeha liphaephe, kaha o potlakile, o nepahetse ebile o na le liphoso tse fokolang.
LITŠOANTŠI TSE KHOLO
1. Qetello ea bevel joalo ka ANSI B16.25.
2. Ho koloha ha lehlabathe, Tharollo e Tiileng, e Ekelitsoeng.
3. Ntle le lamination le mapetsong.
4. Ntle le litokiso tsa weld.
5. E ka ba le kapa ntle le tangent pheletsong e 'ngoe le e' ngoe, bolelele ba tangent bo ka etsoa ka mokhoa o ikhethileng.
HLAHLOBO
1. Litekanyo tsa boholo, kaofela li ka har'a mamello e tloaelehileng.
2. Mamello ea botenya:+/-12.5% , kapa ka kopo ea hau.
3. PMI.
4. MT, UT,PT, X-ray test.
5. Amohela tlhahlobo ea Mokha oa Boraro.
6. Phepelo ea MTC, EN10204 3.1/3.2 setifikeiti.
PHAKALA LE KOPELO
1. E pakiloeng ka mokotla oa plywood kapa pallet ea plywood ho latela ISPM15
2. re tla beha lethathamo la ho paka sephutheloana ka seng
3. re tla beha matšoao a ho romella sephutheloana ka seng. Mantswe a matshwao a kopo ya hao.
4. Lisebelisoa tsohle tsa pakete ea lehong ha li na fumigation mahala
5. Ho boloka litšenyehelo tsa ho romella, bareki kamehla ha ba hloke sephutheloana. Kenya bend ka har'a setshelo ka kotloloho
Kobeha peipi e ntšo ea tšepe
Ntle le ha tšepe e kobeha, hape e ka hlahisa phala e ntšo ea tšepe, lintlha tse ling, ka kopo, tobetsa sehokelo se latelang.
Tšepe ea carbon, tšepe ea Cr-mo alloy le tšepe ea carbon ea nako e tlaase le tsona lia fumaneha
LBH
Lipotso le likarabo tse atisang ho botsoa mabapi le liphaephe tsa Carbon Steel Bend
1. K'habone tšepe setsoe ke eng?
Setsoe sa tšepe ea carbon ke peipi e kenang e sebelisetsoang ho fetola tsela ea tsamaiso ea liphaephe. E entsoe ka tšepe ea carbon 'me e tsebahala ka matla le ho tšoarella ha eona.
2. Melemo ea ho sebelisa likhabone tsa tšepe ea carbon ke efe?
Litsoeli tsa tšepe ea carbon ha li bola 'me li khona ho mamella mocheso o phahameng le khatello. Li boetse li theko e tlase ho feta lisebelisoa tse ling, e leng se etsang hore e be khetho e theko e tlaase bakeng sa lits'ebetso tse ngata.
3. Ke boholo bofe bo fumanehang bakeng sa likhase tsa tšepe tsa carbon?
Li-elbows tsa tšepe tsa carbon li fumaneha ka boholo bo fapaneng ho fihlela litlhoko tse fapaneng tsa liphaephe. Mefuta e tloaelehileng e tloha ho 1/2 inch ho isa ho 48 inches, boholo ba tloaelo le bona boa fumaneha.
4. Na likhabone tsa tšepe tsa k'habone li loketse lits'ebetso tsa mocheso o phahameng?
E, li-elbows tsa carbon steel li loketse lits'ebetso tsa mocheso o phahameng hobane thepa e khona ho mamella mocheso ntle le ho holofala kapa ho fokola.
5. Na litsoele tsa tšepe tsa k'habone li ka chesetsoa?
Ee, litsoele tsa tšepe tsa k'habone li ka chesoa ho sebelisoa mekhoa e tloaelehileng ea ho cheselletsa, ho li lumella ho hokahana habonolo le lits'ebetso tse teng tsa liphaephe.
6. Na likhabone tsa tšepe tsa carbon li loketse ho sebelisoa libakeng tsa indasteri?
Ee, litsoele tsa tšepe tsa k'habone hangata li sebelisoa maemong a indasteri ka lebaka la matla a tsona, ho tšoarella ha tsona, le ho hanyetsa ho bola.
7. Na likhabone tsa tšepe li ka sebelisoa litsamaisong tsa lipeipi tse ka tlas'a lefatše?
Ee, litsoele tsa tšepe tsa k'habone li loketse ho sebelisoa lits'ebetsong tsa liphaephe tse ka tlas'a lefatše kaha ha li na kutu 'me li khona ho mamella maemo a kantle a tikoloho.
8. Na likhabone tsa tšepe li ka sebelisoa hape?
Ee, peipi e kobehileng ea carbon e ka sebelisoa hape, 'me e ka qhibilihisoa ebe e sebelisoa hape ho etsa lihlahisoa tse ncha tsa tšepe.
9. Na likhabone tsa tšepe li loketse ho sebelisoa indastering ea oli le khase?
E, likhase tsa carbon steel li sebelisoa haholo indastering ea oli le khase ka lebaka la bokhoni ba tsona ba ho mamella likhatello tse phahameng le maemo a thata.
10. Nka reka litsoe tsa carbon steel kae?
Li-elbows tsa tšepe tsa carbon li ka rekoa ho tsoa ho barekisi ba fapaneng, ho kenyeletsoa barekisi ba lipeipi le tse loketseng, mabenkele a phepelo ea liindasteri, le barekisi ba marang-rang ba sebetsanang le lihlahisoa tsa liphaephe.
