English

TOP Moetsi

Lilemo tse 30 Phihlelo ea Tlhahiso

ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow

ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Black Steel Pipe 90 Deg Elbow Featured Image
  • ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow
  • ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow
  • ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow
  • ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow
  • ASME B16.9 A234 SCH 40 STD Butt Welded carbon steel Pipe e Ntšo ea Tšepe Pipe 90 Deg Elbow

Tlhaloso e Khutšoanyane:

Lebitso: Pipe ea tšepe ea Carbon 90 deg Elbow
Tekanyetso: ANSI B16.9
Degree: 90 degree, 90d, 90 deg
lintho tse bonahalang: ASTM A234WPB
Botenya ba lebota: SCH40


  • Radius:LR(1.5D)
  • Mmala:ntsho kapa varnished
  • QETA:qetellong ea bevel
    • Khoasolla joalo ka PDF

    Lintlha tsa Sehlahisoa

    Kalafo ea Mocheso

    Ho tshwaya

    Litšoantšo tse qaqileng

    Tlhahlobo

    Packaging & Shipping

    LITLHAKISO TSA LITŠOANTŠISO

    Lebitso la Sehlahiswa Pepe setsoe
    Boholo 1/2"-36" setsoe se se nang sekoli(SMLS elbow), 26"-110" e cheselitsoeng ka seam. E kholo ka ho fetisisa ka ntle bophara e ka ba 4000mm
    Standard ANSI B16.9, EN10253-2, DIN2605, GOST17375-2001, JIS B2313, MSS SP 75, joalo-joalo.
    Botenya ba lebota STD, XS, XXS, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS joalo-joalo.
    Degree 30° 45° 60° 90° 180°, joalo-joalo
    Radius LR/radiase e telele/R=1.5D,SR/Short radius/R=1D
    QETA Bevel end/BE/buttweld
    Bokaholimo 'mala oa tlhaho, varnished, penta e ntšo, oli e thibelang mafome joalo-joalo.
    Lintho tse bonahalang Tšepe ea carbon:A234WPB, A420 WPL6 St37,St45, E24, A42CP, 16Mn, Q345, P245GH,P235GH, P265GH, P280GH, P295GH, P355GH jj.
      Pipeline steelASTM 860 WPHY42, WPHY52, WPHY60, WPHY65,WPHY70, WPHY80 joalo-joalo.
      Cr-Mo motsoako oa tšepe:A234 WP11, WP22, WP5, WP9, WP91, 10CrMo9-10, 16Mo3 , 12crmov, joalo-joalo.
    Kopo Indasteri ea peterole; indasteri ea lifofane le sefofane; indasteri ea meriana, mouoane oa khase; setsi sa motlakase;kaho ea likepe; phekolo ea metsi, joalo-joalo.
    Melemo setoko se itokisitseng, nako ea ho fana ka potlako; e fumaneha ka boholo bohle, e hlophisitsoe; boleng bo holimo

    LIEKETSENG PEPI

    Lisebelisoa tsa lipeipi tse cheselitsoeng ka butt li kenyelletsa setsoe sa phala ea tšepe, tee ea lipeipi tsa tšepe, mochini o fokotsang lipeipi tsa tšepe, sekoaelo sa phala ea tšepe. Lisebelisoa tsohle tsa lipeipi tsa welding tsa butt, re ka fana ka tsona, re na le boiphihlelo ba tlhahiso ea lilemo tse fetang 20.

    Haeba u boetse u khahlehela lisebelisoa tse ling, ka kopo, tlanya ho latela LINK ho bona lintlha.

     PIPI TEE                                MOHAPI MOHAPI                            PIPE CAP                                        PIPI KOBA                                     LIEKETSENG LITS'OANE

    EMPA TŠEBELETSO PIPI SETSANE

    Setsoe sa pipe ea tšepe ke karolo ea bohlokoa tsamaisong ea liphaephe bakeng sa ho fetola tsela ea phallo ea mokelikeli. E sebelisoa ho hokahanya liphaephe tse peli tse nang le li-diameter tse tšoanang kapa tse fapaneng, le ho etsa hore pipe e fetohele lehlakoreng le itseng la 45 degree kapa 90 degree.

    Bakeng sa setsoe sa pipe ea indasteri, mofuta oa ho qetela oa connectin ke butt weld, ho latela ANSI B16.25. Butt welded ka hlalosa butt welding, buttweld, bevel end. BW

    MOFUTA SETSWANE

    Elbow e ne e ka aroloa ho tloha lehlakoreng la tataiso, mefuta ea khokahanyo, bolelele le radius, mefuta ea thepa.

    Classified ka Direction Angle

    Joalo ka ha re tseba, ho latela tataiso ea mokelikeli oa liphaephe, setsoe se ka aroloa ka likhato tse fapaneng, joalo ka 45 degree, 90 degree, 180 degree, e leng likhato tse atileng haholo. Hape ho na le 60 degree le 120 degree, bakeng sa liphaephe tse ling tse khethehileng.

    Bakeng sa setsoe sa likhato tse 90, hape ho hlalositsoe setsoe sa 90d, kapa setsoe sa 90 deg.

    Elbow Radius ke eng

    Radiase ea setsoe e bolela sebaka se kobehileng. Haeba radius e lekana le bophara ba phala, e bitsa setsoe sa radius e khuts'oane, eo hape e bitsoang SR elbow, hangata bakeng sa khatello e tlase le liphaephe tsa lebelo le tlase.

    Haeba radius e le kholo ho feta bophara ba pipe, R ≥ 1.5 Diameter, joale re e bitsa radius elbow e telele (LR Elbow), e sebelisetsoang khatello e phahameng le liphaephe tse phahameng tsa phallo.

    Haeba radius e feta 1.5D, kamehla e bitsoa bend. lipeipi tse kobehang ka setsoe. Joalo ka setsoe sa 2d, kobeha 2d, setsoe sa 3d, setsoe sa 3d, joalo-joalo.

    Ho Hlophisa ka Boitsebiso

    Tšepe ea carbon, eo hape e bitsoang tšepe e bonolo kapa tšepe e ntšo. Joalo ka ASTM A234 WPB

    U batla litsoe tsa tšepe e sa hloekang, ka kopo, tobetsa sehokelo sena ho fumana lintlha tse ling:MAKHOANA TŠEPE

    Mofuta oa Sebopeho

    E ka ba setsoe se lekanang kapa Ho fokotsa setsoe

    SETS'OE SEBAKA

    Ho phatloha ha Lehlabathe

    Ka mor'a ho theha mocheso, re hlophisa ho phatloha ha lehlabathe ho etsa hore bokaholimo bo hloeke ebile bo boreleli.

    Ka mor'a Lehlabathe le phatloha, ho qoba ho fumana mafome, ho lokela ho etsa penta e ntšo kapa oli e khahlanong le mafome, Hot dip galvanized (HDG) , epoxy, 3PE, holim'a metsi, joalo-joalo Seo se itšetlehile ka kopo ea bareki.

    PHEKO MOCHESO

    1. Boloka mohlala oa lisebelisoa tse tala ho latela.
    2. Hlophisa kalafo ea mocheso ho latela maemo a thata.

    TŠOAOA

    Mesebetsi e fapaneng ea ho tšoaea, e ka kobeha, ea penta, ea lable. Kapa ka kopo ea hau. Re amohela ho tšoaea LOGO ea hau.

    5

    5

    LITŠOANTŠI TSE KHOLO

    1. Qetello ea bevel joalo ka ANSI B16.25.

    2. Ho phatloha ha lehlabathe pele, ebe mosebetsi o phethahetseng oa ho penta. Hape e ka ba varnished.

    3. Ntle le lamination le mapetsong.

    4. Ntle le litokiso tsa weld.

    5

    HLAHLOBO

    1. Litekanyo tsa boholo, kaofela li ka har'a mamello e tloaelehileng.

    2. Mamello ea botenya:+/-12.5% ​​, kapa ka kopo ea hau

    3. PMI

    4. Teko ea MT, UT, X-ray

    5. Amohela tlhahlobo ea Mokha oa Boraro

    6. Phepelo ea MTC, EN10204 3.1/3.2 setifikeiti

    5

    5

    PAKATSO& TS'EPE

    1. E pakiloeng ka mokotla oa plywood kapa pallet ea plywood ho latela ISPM15

    2. re tla beha lethathamo la ho paka sephutheloana ka seng

    3. re tla beha matšoao a ho romella sephutheloana ka seng. Mantswe a matshwao a kopo ya hao.

    4. Lisebelisoa tsohle tsa pakete ea lehong ha li na fumigation mahala

  • E fetileng:
  • E 'ngoe:

    • Phekolo ea mocheso

    1. Boloka mohlala oa lisebelisoa tse tala ho latela.
    2. Hlophisa kalafo ea mocheso ho latela maemo a thata.

    7fbbce236

    Ho tshwaya

    Mesebetsi e fapaneng ea ho tšoaea, e ka kobeha, ea penta, ea lable. Kapa ka kopo ea hau. Re amohela ho tšoaea LOGO ea hau.

    d75a2a571

    d9bd52b6

     

    Litšoantšo tse qaqileng

    1. Qetello ea bevel joalo ka ANSI B16.25.

    2. Ho phatloha ha lehlabathe pele, ebe mosebetsi o phethahetseng oa ho penta. Hape e ka ba varnished.

    3. Ntle le lamination le mapetsong.

    4. Ntle le litokiso tsa weld.

     

    6ab1f77a1

     

    Tlhahlobo

    1. Litekanyo tsa boholo, kaofela li ka har'a mamello e tloaelehileng.

    2. Mamello ea botenya:+/-12.5% ​​, kapa ka kopo ea hau

    3. PMI

    4. Teko ea MT, UT, X-ray

    5. Amohela tlhahlobo ea Mokha oa Boraro

    6. Phepelo ea MTC, EN10204 3.1/3.2 setifikeiti

     

    40f8649a

     

    Packaging & Shipping

    1. E pakiloeng ka mokotla oa plywood kapa pallet ea plywood ho latela ISPM15

    2. re tla beha lethathamo la ho paka sephutheloana ka seng

    3. re tla beha matšoao a ho romella sephutheloana ka seng. Mantswe a matshwao a kopo ya hao.

    4. Lisebelisoa tsohle tsa pakete ea lehong ha li na fumigation mahala

     

    LIHLAHISO TSE HLAHANG